dmesg - Intel Core i5-6200U - Intel HD 520 3072MB - HP 8079
microcode: microcode updated early to revision 0xcc, date = 2019-04-01
Linux version 4.18.0-25-generic (buildd@lgw01-amd64-033) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #26~18.04.1-Ubuntu SMP Thu Jun 27 07:28:31 UTC 2019 (Ubuntu 4.18.0-25.26~18.04.1-generic 4.18.20)
Command line: BOOT_IMAGE=/vmlinuz-4.18.0-25-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable
BIOS-e820: [mem 0x00000000c70fb000-0x00000000c75fafff] type 20
BIOS-e820: [mem 0x00000000c75fb000-0x00000000c7c7efff] reserved
BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS
BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data
BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable
BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved
BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004317fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by HP
efi: ACPI=0xc7efe000 ACPI 2.0=0xc7efe014 SMBIOS=0xc78db000 MPS=0xc79b4000 ESRT=0xc7073660
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.7 present.
DMI: HP HP EliteBook 840 G3/8079, BIOS N75 Ver. 01.18 10/17/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x431800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00D0000000 mask 7FF0000000 uncachable
2 base 00CC000000 mask 7FFC000000 uncachable
3 base 00CA000000 mask 7FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xc7f00 max_arch_pfn = 0x400000000
esrt: ESRT header is not in the memory map.
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 97000 size 24576
Using GB pages for direct mapping
BRK [0x160963000, 0x160963fff] PGTABLE
BRK [0x160964000, 0x160964fff] PGTABLE
BRK [0x160965000, 0x160965fff] PGTABLE
BRK [0x160966000, 0x160966fff] PGTABLE
BRK [0x160967000, 0x160967fff] PGTABLE
BRK [0x160968000, 0x160968fff] PGTABLE
BRK [0x160969000, 0x160969fff] PGTABLE
BRK [0x16096a000, 0x16096afff] PGTABLE
RAMDISK: [mem 0x307b1000-0x343cffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000C7EFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000C7EBC188 0000D4 (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x00000000C7EEE000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x00000000C7EC4000 026545 (v02 HPQOEM 8079 00000000 INTL 20121018)
ACPI: FACS 0x00000000C7E68000 000040
ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
ACPI: MSDM 0x00000000C7EF1000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: SLIC 0x00000000C7EF0000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001)
ACPI: WSMT 0x00000000C7EEF000 000028 (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: HPET 0x00000000C7EED000 000038 (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: APIC 0x00000000C7EEC000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: MCFG 0x00000000C7EEB000 00003C (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: SSDT 0x00000000C7EC3000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC2000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC1000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC0000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
ACPI: NHLT 0x00000000C7EBF000 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x00000000C7EBE000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x00000000C7EBD000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x00000000C7EFD000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004317fffff]
NODE_DATA(0) allocated [mem 0x4317d5000-0x4317fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004317fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000c70fafff]
node 0: [mem 0x00000000c7eff000-0x00000000c7efffff]
node 0: [mem 0x0000000100000000-0x00000004317fffff]
Reserved but unavailable: 3943 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000004317fffff]
On node 0 totalpages: 4163737
DMA zone: 64 pages used for memmap
DMA zone: 89 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12676 pages used for memmap
DMA32 zone: 811260 pages, LIFO batch:31
Normal zone: 52320 pages used for memmap
Normal zone: 3348480 pages, LIFO batch:31
Reserving Intel graphics memory at [mem 0xca800000-0xcc7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc70fb000-0xc75fafff]
PM: Registered nosave memory: [mem 0xc75fb000-0xc7c7efff]
PM: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff]
PM: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff]
PM: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff]
PM: Registered nosave memory: [mem 0xcc800000-0xf80f9fff]
PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[mem 0xcc800000-0xf80f9fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4098588
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-25-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16004016K/16654948K available (12300K kernel code, 2633K rwdata, 4380K rodata, 2464K init, 2340K bss, 650932K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 40828 entries in 160 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 2400.000 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 12:41:20, date: 07/11/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1562848880.052:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311E954800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311EAA3400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311E9C8C00 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311EB1FA00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311E951800 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311EB1EC00 000119 (v02 PmRef ApHwp 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C311EB1EE00 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PXP] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xe124a000-0xe124afff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xe124f000-0xe124f0ff]
pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:17.0: reg 0x24: [mem 0xe124d000-0xe124d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xe1240000-0xe1243fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xe1244000-0xe1247fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xe124e000-0xe124e0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x431800000-0x433ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN3037 SYN0100 SYN0002 PNP0f13 (active)
system 00:07: [io 0x0200-0x023f] has been reserved
system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved
system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfe030000-0xfe030007] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc900000-0xccafffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff]
pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 61564K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb4a38000-0xb8a38000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.27)
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: AER enabled with IRQ 120
pcieport 0000:00:1c.3: AER enabled with IRQ 121
pcieport 0000:00:1c.0: Signaling PME with IRQ 120
pcieport 0000:00:1c.3: Signaling PME with IRQ 121
pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (26 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (25 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (28 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (127 C)
Linux agpgart interface v0.103
tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
tpm tpm0: TPM is disabled/deactivated (0x7)
tpm tpm0: tpm_read_log_acpi: TCPA log area empty
tpm_tis: probe of 00:0b failed with error -5
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x406e3, pf=0x80, revision=0xcc
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (4589607702, 0)->(4569752733, 19854969)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 1905f759da59a5526cc39fe3243b9dc0d8136b3b'
Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 11:237:683
rtc_cmos 00:03: setting system clock to 2019-07-11 12:41:24 UTC (1562848884)
usb 1-7: new full-speed USB device number 2 using xhci_hcd
Freeing unused kernel image memory: 2464K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1764K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
cryptd: max_cpu_qlen set to 1000
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
usb 1-8: new full-speed USB device number 3 using xhci_hcd
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d100 irq 125
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d200 irq 125
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
random: fast init done
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
[drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) ac:e2:d3:9f:bf:a8
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-8: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-8: SerialNumber: 00b054667780
usb 1-9: new high-speed USB device number 4 using xhci_hcd
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-9: New USB device found, idVendor=05c8, idProduct=0383, bcdDevice= 1.06
usb 1-9: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-9: Product: HP HD Camera
usb 1-9: Manufacturer: Sonix Technology Co., Ltd.
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ATA-9: SAMSUNG MZNLN256HCHP-000H1, EMT22H0Q, max UDMA/133
ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZNLN256 2H0Q PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
psmouse serio3: synaptics: Your touchpad (PNP: SYN3037 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected].
psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
NET: Registered protocol family 38
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
systemd[1]: Created slice System Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Listening on udev Control Socket.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[472]: Received request to flush runtime journal from PID 1
input: HP Wireless hotkeys as /devices/virtual/input/input13
hp_accel: hardware type HPB64xx found
tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
lis3lv02d: 8 bits 3DC sensor found
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
media: Linux media interface: v0.10
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
videodev: Linux video capture interface: v2.00
ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000c1b51c1a (20180531/exresop-560)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20180531/dswexec-427)
Initialized Local Variables for Method [WVPO]:
Local1: 00000000be8eaf0d Buffer(12) 00 00 00 00 00 00 00 00
Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation)
Arg0: 00000000b36c2780 Integer 0000000000000004
Arg1: 00000000c1b51c1a Integer 0000000000000000
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
ACPI Error: Needed [Buffer/String/Package], found [Integer] 0000000088179451 (20180531/exresop-560)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20180531/dswexec-427)
Initialized Local Variables for Method [WVPO]:
Local1: 0000000042e24a16 Buffer(12) 00 00 00 00 00 00 00 00
Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation)
Arg0: 0000000051a0f213 Integer 0000000000000004
Arg1: 0000000088179451 Integer 0000000000000000
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000691a97a6 (20180531/exresop-560)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20180531/dswexec-427)
Initialized Local Variables for Method [WVPO]:
Local1: 00000000f63e3614 Buffer(12) 00 00 00 00 00 00 00 00
Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation)
Arg0: 000000008be9d2de Integer 0000000000000004
Arg1: 00000000691a97a6 Integer 0000000000000000
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
input: HP WMI hotkeys as /devices/virtual/input/input14
ACPI Error: Attempt to CreateField of length zero (20180531/dsopcode-134)
Initialized Local Variables for Method [WVPI]:
Local0: 0000000080584018 Integer 0000000000000080
Local1: 00000000be8eaf0d Package 00000000be8eaf0d
Initialized Arguments for Method [WVPI]: (3 arguments defined for method invocation)
Arg0: 0000000076a24559 Integer 0000000000000000
Arg1: 00000000fa679a0a Integer 0000000000000003
Arg2: 00000000cb72c624 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180531/psparse-516)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180531/psparse-516)
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
uvcvideo: Found UVC 1.00 device HP HD Camera (05c8:0383)
iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
kvm: disabled by bios
uvcvideo 1-9:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized!
input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: action: 0 gpio_led: 0
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Line=0x18
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
snd_hda_codec_conexant hdaudioC0D0: action: 1 gpio_led: 0
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1
iwlwifi 0000:02:00.0: base HW address: 44:85:00:95:1f:2d
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone8: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1562848893.948:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=944 comm="apparmor_parser"
audit: type=1400 audit(1562848893.948:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=944 comm="apparmor_parser"
audit: type=1400 audit(1562848893.948:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=944 comm="apparmor_parser"
audit: type=1400 audit(1562848893.948:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioq3ded" pid=945 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=947 comm="apparmor_parser"
audit: type=1400 audit(1562848893.952:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=948 comm="apparmor_parser"
Process accounting resumed
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input25
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1643301 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10725 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
kauditd_printk_skb: 39 callbacks suppressed
audit: type=1107 audit(1562848973.836:51): pid=1054 uid=103 auid=4294967295 ses=4294967295 subj==unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=2393 label="snap.chromium.chromium" peer_pid=1069 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
e1000e: enp0s31f6 NIC Link is Down
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp0s31f6 NIC Link is Down
atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e005 ' to make it known.
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.412 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 126: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ fixup: irq 122 move in progress, old vector 33
IRQ 122: no longer affine to CPU3
IRQ 128: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
usb 1-7: reset full-speed USB device number 2 using xhci_hcd
usb 1-8: reset full-speed USB device number 3 using xhci_hcd
usb 1-9: reset high-speed USB device number 4 using xhci_hcd
ACPI: EC: event unblocked
acpi LNXPOWER:17: Turning OFF
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:03: Turning OFF
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pcieport 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pcieport 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
done.
thermal thermal_zone8: failed to read out thermal zone (-61)
PM: suspend exit
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1490370 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10782 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
usb 1-1: new high-speed USB device number 7 using xhci_hcd
usb 1-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Silicon-Power16G
usb 1-1: Manufacturer: UFD 2.0
usb 1-1: SerialNumber: 201211SP006506010251
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G 1100 PQ: 0 ANSI: 4
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 30910464 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: USB disconnect, device number 7
wlp2s0: authenticate with f2:c5:f3:79:79:64
wlp2s0: send auth to f2:c5:f3:79:79:64 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with f2:c5:f3:79:79:64 (try 1/3)
wlp2s0: RX AssocResp from f2:c5:f3:79:79:64 (capab=0x411 status=0 aid=1)
wlp2s0: associated
wlp2s0: deauthenticated from f2:c5:f3:79:79:64 (Reason: 2=PREV_AUTH_NOT_VALID)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with f2:c5:f3:79:79:64
wlp2s0: send auth to f2:c5:f3:79:79:64 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with f2:c5:f3:79:79:64 (try 1/3)
wlp2s0: RX AssocResp from f2:c5:f3:79:79:64 (capab=0x411 status=0 aid=1)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
usb 1-1: new high-speed USB device number 8 using xhci_hcd
usb 1-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Silicon-Power16G
usb 1-1: Manufacturer: UFD 2.0
usb 1-1: SerialNumber: 201211SP006506010251
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-1:1.0
scsi 3:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G 1100 PQ: 0 ANSI: 4
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 30910464 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
gedit[5530]: segfault at 348 ip 00007f907a535e76 sp 00007ffd8e7972b0 error 4 in libgedit.so[7f907a4d7000+d9000]
Code: 47 fc ff 48 89 ef 48 89 c6 e8 76 2d fc ff 48 89 c7 e8 5e 6b fc ff 48 85 c0 74 51 48 89 c7 e8 01 4a fc ff 49 89 c4 48 8b 43 40 8b a8 c8 00 00 00 e8 2e 61 fc ff 48 89 c6 48 89 ef e8 43 2d fc
usb 1-1: USB disconnect, device number 8
wlp2s0: deauthenticated from f2:c5:f3:79:79:64 (Reason: 3=DEAUTH_LEAVING)
wlp2s0: authenticate with f2:c5:f3:79:79:64
wlp2s0: send auth to f2:c5:f3:79:79:64 (try 1/3)
wlp2s0: send auth to f2:c5:f3:79:79:64 (try 2/3)
wlp2s0: send auth to f2:c5:f3:79:79:64 (try 3/3)
wlp2s0: authentication with f2:c5:f3:79:79:64 timed out
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e005 ' to make it known.
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.387 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 126: no longer affine to CPU1
smpboot: CPU 1 is now offline
IRQ fixup: irq 122 move in progress, old vector 34
smpboot: CPU 2 is now offline
IRQ 128: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
usb 1-8: reset full-speed USB device number 3 using xhci_hcd
usb 1-7: reset full-speed USB device number 2 using xhci_hcd
usb 1-9: reset high-speed USB device number 4 using xhci_hcd
ACPI: EC: event unblocked
acpi LNXPOWER:17: Turning OFF
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:03: Turning OFF
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pcieport 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pcieport 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
done.
thermal thermal_zone8: failed to read out thermal zone (-61)
PM: suspend exit
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1449485 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10731 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
wlp2s0: authenticate with 6c:3b:6b:11:ea:3f
wlp2s0: send auth to 6c:3b:6b:11:ea:3f (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 6c:3b:6b:11:ea:3f (try 1/3)
wlp2s0: RX AssocResp from 6c:3b:6b:11:ea:3f (capab=0x431 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3155 > 3133), lowering kernel.perf_event_max_sample_rate to 63250
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500
perf: interrupt took too long (3952 > 3943), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4988 > 4940), lowering kernel.perf_event_max_sample_rate to 40000
usb 1-2: new high-speed USB device number 10 using xhci_hcd
usb 1-2: New USB device found, idVendor=05ac, idProduct=12ab, bcdDevice= 6.03
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: iPad
usb 1-2: Manufacturer: Apple Inc.
usb 1-2: SerialNumber: bdace869ae5c57d1acc0ff9b3c757e507fc9bd5b
ipheth 1-2:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
ipheth 1-2:4.2 enp0s20f0u2c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2c4i2: link is not ready
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500
ipheth 1-2:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-2: USB disconnect, device number 10
ipheth 1-2:4.2: Apple iPhone USB Ethernet now disconnected
atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e005 ' to make it known.
wlp2s0: deauthenticating from 6c:3b:6b:11:ea:3f by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.366 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 126: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 128: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
usb 1-8: reset full-speed USB device number 3 using xhci_hcd
usb 1-7: reset full-speed USB device number 2 using xhci_hcd
usb 1-9: reset high-speed USB device number 4 using xhci_hcd
ACPI: EC: event unblocked
acpi LNXPOWER:17: Turning OFF
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
acpi LNXPOWER:03: Turning OFF
OOM killer enabled.
Restarting tasks ... done.
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pcieport 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pcieport 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
thermal thermal_zone8: failed to read out thermal zone (-61)
PM: suspend exit
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1600125 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10741 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
wlp2s0: authenticate with e2:55:2d:f3:89:5c
wlp2s0: send auth to e2:55:2d:f3:89:5c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e2:55:2d:f3:89:5c (try 1/3)
wlp2s0: RX AssocResp from e2:55:2d:f3:89:5c (capab=0x1411 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e2:55:2d:f3:89:5c
usb 1-1: new high-speed USB device number 12 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 12
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
rfkill: input handler enabled
usb 1-1: new high-speed USB device number 13 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 13
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new high-speed USB device number 14 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 14
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new high-speed USB device number 15 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
rfkill: input handler disabled
audit: type=1107 audit(1562927043.981:52): pid=1054 uid=103 auid=4294967295 ses=4294967295 subj==unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=12322 label="snap.chromium.chromium" peer_pid=1069 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 15
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
rfkill: input handler enabled
usb 1-1: new high-speed USB device number 16 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
rfkill: input handler disabled
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 16
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new full-speed USB device number 17 using xhci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full-speed USB device number 18 using xhci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb usb1-port1: attempt power cycle
usb 1-1: new high-speed USB device number 19 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
audit: type=1107 audit(1562927746.933:53): pid=1054 uid=103 auid=4294967295 ses=4294967295 subj==unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=12893 label="snap.chromium.chromium" peer_pid=1069 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
sctp: Hash tables configured (bind 256/256)
rfkill: input handler enabled
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
perf: interrupt took too long (6238 > 6235), lowering kernel.perf_event_max_sample_rate to 32000
rfkill: input handler enabled
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 19
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new high-speed USB device number 20 using xhci_hcd
usb 1-1: new high-speed USB device number 21 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
rfkill: input handler disabled
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 21
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
rfkill: input handler enabled
usb 1-1: new high-speed USB device number 22 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
rfkill: input handler disabled
rfkill: input handler enabled
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 22
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new high-speed USB device number 23 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
rfkill: input handler disabled
rfkill: input handler enabled
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 23
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1: new high-speed USB device number 24 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: dd2f37fbe2165acf1db7c793556466b924096370
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
ipheth 1-1:4.2 enp0s20f0u1c4i2: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1c4i2: link is not ready
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 24
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
rfkill: input handler disabled
atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e005 ' to make it known.
wlp2s0: deauthenticating from e2:55:2d:f3:89:5c by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.310 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 126: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 128: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/133
usb 1-7: reset full-speed USB device number 2 using xhci_hcd
usb 1-8: reset full-speed USB device number 3 using xhci_hcd
usb 1-9: reset high-speed USB device number 4 using xhci_hcd
ACPI: EC: event unblocked
acpi LNXPOWER:17: Turning OFF
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:03: Turning OFF
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pcieport 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pcieport 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
done.
thermal thermal_zone8: failed to read out thermal zone (-61)
PM: suspend exit
e1000e: enp0s31f6 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1592871 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 10718 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 6c:3b:6b:11:ea:3f
wlp2s0: send auth to 6c:3b:6b:11:ea:3f (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 6c:3b:6b:11:ea:3f (try 1/3)
wlp2s0: RX AssocResp from 6c:3b:6b:11:ea:3f (capab=0x431 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
audit: type=1107 audit(1562978719.161:54): pid=1054 uid=103 auid=4294967295 ses=4294967295 subj==unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=16992 label="snap.chromium.chromium" peer_pid=1069 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500
snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x201f0500